(5) Choose the menu Phase 1, under the Proposal Parameters, the Exchange Type, DH Exchange, Cipher Algorithm, and Hash Algorithm are the same with VPN Router’s, we use aggressive, group 2, 3des, md5 here. (4) Choose the menu Authentication > Credentials.
Specify 321 as FQDN String in Local Identify section and specify 123 as FQDN String in Remote Identify section. Select Fully Qualified Domain Name as Identification Type. Select Mutual PSK as Authentication Method. (2) Choose the menu Name Resolution, don’t tick the Enable DNS and the Enable WINS. Select Use an existing adapter and current address as Adapter Mode. Specify Host Name or IP Address as 10.10.10.10. Once the VPN server or client is behind a NAT device, the proposal cannot be specified as ah-md5 or as –sha1, otherwise, the VPN tunnel can’t be established.
Specify Exchange Mode as Aggressive Mode.In the Phase-1 Settings section, configure the IKE phase-1 parameters. (2) Click Advanced Settings to load the following page. Specify the Pre-shared Key as you like.Specify WAN as WAN1 and local subnet as 192.168.0.0/24.You also can enter 0.0.0.0 to allow any IP address. Specify the Remote Host as 10.10.10.20.Configure the basic parameters for the IPsec policy. (1) Choose the menu VPN > IPSec > IPSec Policy and click Add to load the following page on the VPN router. Step1 Verify the settings needed for IPsec VPN on routerĬhoose the menu Status > System Status and Network > LAN. Take the following topology as an example, we will learn how to configure the VPN server and VPN client. But we need to use some VPN client software like Shrew. Then we can access the private network of the VPN Router securely via the internet.
With Client to LAN VPN function, the VPN Router will be a VPN server and we can use our PCs to establish the VPN tunnel with it.
0 kommentar(er)
